Transmission Drive Chain - KEEWAY Rkv200g Manual

Drive Chain
Appropriate lubricant and adjustment is needed for its service life.
Frequent maintenance is needed to prolong chain life.
Adjustment of Chain:
Adjust the looseness of the chain from 10 to 15mm at every 1000 km
interval.
20
RKV MANUAL - ARTWORK.indd 20
Advice:
This is the maximum interval for adjustment. Actually it
should be regularly checked before riding. Over looseness
would make the chain fall off the path, which can result in
accidents or severe damage to the engine.
1. Prop the motorcycle;
2. Loosen the rear axle nut;
3. Loosen the chain adjuster nut;
4. Rotate the adjust bolt to the left or right to adjust the looseness
and keep the front and back sprocket in a line. Reference marks
are made on the swing arms and adjusters, which can be aimed
at and taken as references from one point to the other. Keep
the looseness between 10 and 20mm, readjust the rear axle nut
and have a final inspection.
Note:
Check the front and rear sprocket for any signs of worn
out before changing the chain.
Advice:
The chain head-clamp is on the open end, install it in reverse
direction of running.
Chain head-clamp
23/7/2013 11:11:08 AM