On-Screen Display(Osd); Troubleshooting - Philips 200P7ES/00 Service Manual

This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these
solutions, contact Philips customer service representative.
Common Problems
Having this problem
No Picture
(Power LED not lit)
No Picture
(Power LED is amber or yellow)
Screen says
AUTO button not working properly
Imaging Problems
Display position is incorrect
Image vibrates on the screen

Troubleshooting

Check these items
·
Make sure the power cord is plugged into the
power outlet and into the back of the monitor.
·
First, ensure that the power button on the front
of the monitor is in the OFF position, then
press it to the ON position.
·
Make sure the computer is turned on.
·
Make sure the signal cable is properly
connected to your computer.
·
Check to see if the monitor cable has bent
pins.
·
The Energy Saving feature may be activated
·
Make sure the monitor cable is properly
connected to your computer. (Also refer to the
Quick Set-Up Guide).
·
Check to see if the monitor cable has bent
pins.
·
Make sure the computer is turned on.
·
The Auto Function is designed for use on
standard Macintosh or IBM-compatible PCs
running Microsoft Windows.
·
It may not work properly if using nonstandard
PC or video card.
·
Press the Auto button.
·
Adjust the
Phase/Clock of More Settings in OSD Main
Controls.
Check that the signal cable is properly connected to the
graphics board or PC
image position using the
200P7 LCD 15
Go to cover page