Fm/Am Radio - Panasonic SC-PM321 Operating Instructions Manual

FM/AM Radio

Manual tuning Manual tuning
Press [TUNER/BAND] to select "FM" or "AM".
1
2 Press [PLAY MODE] to select "MANUAL".
Press [ /4] or [ /¢] to select the frequency of
3
the required station.
" ST " is displayed when a stereo FM broadcast is being
received.
To tune automatically
Press [ /4] or [ /¢] for a moment until the frequency
starts changing rapidly. The unit begins auto tuning, stopping
when it fi nds a station.
• Auto tuning may not function when there is excessive
interference.
• To cancel auto tuning, press [ /4] or [ /¢] once
again.
To improve FM sound quality To improve FM sound quality
Press and hold [PLAY MODE] to display "MONO".
To cancel
Press and hold [PLAY MODE] again until "MONO"
disappears.
• MONO is also canceled if the frequency is changed.
• Turn off "MONO" for normal listening.
Numeric
buttons
Memory preset Memory preset
Up to 15 stations can be set in both the FM and AM bands.
Preparation
Press [TUNER/BAND] to select "FM" or "AM".
Automatic presetting Automatic presetting
Press and hold [PROGRAM] to start presetting.
Manual presetting Manual presetting
Press [PLAY MODE] to select "MANUAL".
1
2 Press [ /4] or [ /¢] to tune to the required
station.
3 Press [PROGRAM].
4 Press the numeric buttons to select a channel.
The station occupying a channel is erased if another
station is preset in that channel.
5 Repeat steps 2 to 4 to preset more stations.
Selecting a preset station Selecting a preset station
Press the numeric buttons to select the channel.
For channels 10 to 15 press [h10], then the two digits.
OR
1 Press [PLAY MODE] to select "PRESET".
Press [ /4] or [ /¢] to select the channel.
2
FM allocation setting FM allocation setting
By main unit only
This system can also receive FM broadcasts allocated in
0.1 MHz steps.
To change the step to 0.1 MHz
1 Press [TUNER/BAND] to select "FM".
Press and hold [TUNER/BAND].
2
After a few seconds the display changes to a fl ashing
display of the current minimum frequency.
Continue to hold down [TUNER/BAND].
3
• When the minimum frequency changes, release the button.
To return to the original step, repeat the above steps.
• After the setting is changed, any previously preset
frequency will be cleared.
9