List Of Clear Causes - Nera saturn bp Technical Manual

Table of Contents

Advertisement

S e r v i c e
S e r v i c e
S e r v i c e
Display
Ref No.
Action
Message
0000/000 UNSPECIFlED
REASON
1021/000 OFF_HOOK
TRY AGAIN
TIMEOUT
1081/000 TERMINAL ID
MISMATCH
1141/000 PRIORITY
PREEMPTION
1142/000 DISTRESS
PREEMPTION
1144/000 DISTRESS
PREEMPTION
1145/000 PRIORITY
PREEMPTION
11D1/000 UNDEFINED
TRY AGAIN
REASON
11D2/000 INCORRECT
TRY AGAIN
NUMBER
11D3/000 INCORRECT
TRY AGAIN
NUMBER
11D4/000 CREDIT CARD
TRY AGAIN
DATA INVALID
1201/000 SIMPLEX CALL
SUCCESSFUL
1261/000 SIMPLEX CALL
UNSUCCESSFUL
1262/000 DISTRESS
TEST TIMEOUT
12B1/001 DIAL TIMEOUT
TRY AGAIN
12B1/002 UNSUCCESSFUL TRY AGAIN
CALL ATTEMPT
12B1/003 UNSUCCESSFUL TRY AGAIN
CALL ATTEMPT
12B1/004 UNSUCCESSFUL TRY AGAIN
CALL ATTEMPT
Saturn Bp Portable – Technical Manual
Comments
Off Hook was not received from addressed MES
terminal within time limit.
The specified MES terminal number has not been
installed
Pre-emption by MES user instruction to establish a
higher priority call
Offered shore-call cleared, pre-empted at MES by
Distress.
Attempted ship-call cleared, pre-empted at MES by
Distress.
Attempted ship-call cleared, pre-empted at MES.
Invalid information from MES; Service-Nature,
-Type or Channel Param.
The "service address" information received from
MES is invalid
The "service address" received from MES is currently
undefined
Credit card information received from the MES is
invalid
MES is acknowledging the receipt of a simplex call
Acknowledge of a simplex call which is possibly
unsuccessfully received.
Telephony 'Distress Test' call cleared after 120s
MES is clearing due to timeout of timer TS011
MES is clearing (no SCPC signal received)
Channel is not tuned within allowed time limit.
MES is clearing due to timeout. Waiting for assign-
ment from NCS during shore call.
Display
Ref No.
Action
Message
12B1/005 UNSUCCESSFUL TRY AGAIN
CALL ATTEMPT
12B1/008 LES
TRY NEW LES Signal NUMBER from user carries an illegal CES ac-
UNDEFINED
12B1/009 UNSPECIFIED
TRY AGAIN
REASON
12B1/010 UNSUCCESSFUL TRY AGAIN
CALL ATTEMPT
12B1/011 UNSUCCESSFUL TRY AGAIN
CALL ATTEMPT
12B1/012 BUSY WITH
TRY LATER
CALL
12B1/013 BUSY WITH
TRY LATER
CALL
12B1/014 TOO FREQUENT
TRY LATER
CALL ATTEMPT
12B1/015 MES BUSY
TRY LATER
12B1/020 TEMPERATURE
TOO HIGH
12B1/021 ANTENNA LINK
FAILURE
12B1/022 TX BURST TIME
WAS TOO LONG
12B1/023 TX POWER OUT
WAS TOO HIGH
12B1/024 TX SYNTH.
FAILURE
12B1/025 INITIALIZING
TRY LATER
12B1/026 SPOT BEAM
SELECTION
12B1/027 NETWORK DATA TRY LATER
VALIDATION
12B1/028 GROUP ID
DOWNLOAD

List of Clear Causes

Comments
MES is clearing due to timeout. Waiting for assignment
from NCS during distress call.
cess code parameter.
Call rejected because a call set-up is already in
progress.
MES is clearing due to timeout. Waiting for assignment
from NCS during ship call.
Respond-channel is not tuned in time.
Control did not grant access to terminal due to
conflicting ship call.
Control did not grant access to terminal due to
conflicting shore call.
Control did not grant access to terminal due to too
frequents request.
Control did not grant access to terminal.
System has failed. Ex. temperature alarm.
The communication link to ACU has failed.
The tx burst duration has exceeded the maximum limit.
The tx power output level has exceeded the maximum
limit.
TX synth out of lock, call cleared or abandoned.
System is not ready yet after start-up
Spot beam selection is being performed
Bulletin board data (satellite channel information etc.)
is not yet verified
Group IDs are being updated
37

Advertisement

Table of Contents
loading

Table of Contents