Nera saturn bp Technical Manual page 31

S e r v i c e S e r v i c e
S e r v i c e
4
• (A) Release coax cable
• (B) Disconnect multiplug.
Remove locking spring and disengage locking plate as illus-
trated.
• (C) Disconnect remaining three plugs
Push up locking spring as indicated.
• (D) Unscrew 8 nuts an remove washers.
Note! 7 mm socket
DISMOUNTING
locking spring
Press
Press to
to lock
release
1 1 1 1
1 1
• (D) Place the washers in the recesses and mount the nuts
Note! 7 mm socket
• (C) Interconnect the three plugs
Note! Make sure locking hooks catch.
• (B) Mount multiplug and lock with locking plate and spring
• (A) Mount coax cable
Saturn Bp Portable – Technical Manual
5
• Lift off airduct
• Remove packing carefully.
DISMOUNTING
Release
airduct
gasket
MOUNTING
1 0 1 0
1 0
• Turn the unit around
• Place the packing in correct position
• Place the airduct in correct position
6
• Turn the MCU upside down.
• Remove the large screws fastening the enclosing box
Note! 7 screws – M4x6
• Remove the screws fastening the locking spring
Note! 2 screws – M3x8 with large washers
• Remove remaining bottom plate fastening screws
Note! 7 screws – M3x6 with small washers
• Lift off the box
Note! Be aware of the Connector plate packings
DISMOUNTING
M4x6
M4x6
M4x6
M3x8
M3x8
M3x6
locking spring
MOUNTING
9 9
9
• Replace the enclosing box
Note! Make sure all packings and bushings are correctly
positioned. See previous step.
• Mount the large screws fastening the box
Note! 7 screws – M4x6
• Mount the locking spring
Note! 2 screws – M3x8 with large washers
• Mount the remaining box fastening screws
Note! 7 screws – M3x6, with small washers
Replacing Trunk Parts Replacing Trunk Parts
M4x6
M4x6
M4x6
M4x6
M3x6 M3x6 M3x6 M3x6 M3x6
M3x6
MOUNTING
29