Samsung SNB-5000 User Manual page 49

If the IP router has more than one camera connected
Configure the IP related settings and the Port related settings distinctly with each other.
Category
IP related settings
Port related settings

M
If the <HTTP Port> is set other than 80, you must provide the <Port> number in the address
bar of the Internet browser before you can access the camera.
ex) http://IP address : HTTP Port
http://192.168.1.201:10000
Auto Network Setup
Run <IP Installer.exe> to display the camera search list.
At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.

M
For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not
support this function.
1. Select a camera in the search list.
Find the MAC (Ethernet) address labeled
on the rear of the camera.
Both the [Auto Set] and [Manual Set]
buttons will be activated.
2. Click [Auto Set].
The Auto Setting dialog appears.
The <IP Address>, <Subnet Mask>,
and <Gateway> will be set automatically.
3. Enter the password.
This is the login password for the
"admin" user who accesses the
camera. The default password is
"4321".
4. Click [OK].
Auto network setup will be completed.
5. The camera will automatically complete
the network setting and restart.
IP Address
Subnet Mask
Gateway
HTTP Port
VNP Port
Camera #1
192.168.1.200
255.255.255.0
192.168.1.1
80
4520
Camera #2
192.168.1.201
255.255.255.0
192.168.1.1
10000
4530
English _49