Samsung SNB-5000 User Manual page 19

Inside
Item
Alarm In / Out
terminals
SD Memory Card
Compartment
Reset Button
ALARM IN Used to connect the alarm input signal.
ALARM OUT Used to connect the alarm output signal.
ALARM COM Common port where the alarm output signal is connected.
GND Used for earth-grounding.
Compartment for the SD memory card.
Resets the camera settings to the default. Press and hold it for about 5
seconds to turn off the system indicator and restart the system.
J
Resetting the camera IP address, subnet mask, gateway address etc.
requires the use of the IP Installer software application.
3
Description
English _19