Radio - Panasonic CQ-DP153W Operating Instructions Manual

Radio

E
N
G
L
I
Radio Mode
S
H
Press [SRC] (source) to change to the radio mode.
3
APM
POWER
Band
Press [BAND] to change the band.
Manual Tuning
[l TUNE]: Higher frequency
[k TUNE]: Lower frequency
Seek Tuning
Press and hold ...
[l TUNE]: Higher frequency
[k TUNE]: Lower frequency
Tuning will automatically stop when the signals of the next broadcast station are received.
Direct Memory
Your favorite FM/AM radio station can be memorized in the D · M button and you can call back radio stations just by
pressing the button whatever the current sound source is, even if the power is off.
Default : FM 87.5 MHz
Recalling the Direct Memory
Press [D·M]. (Press again to cancel)
¡The direct memoried station is received.
D-M
8
CQ-DP153W
CD player
Radio
(When a CD is inserted.)
FM Stereo indicator
CQ-DP153W
D•M
D•M
TUNE TUNE
TRACK TRACK
ST MONO LOCAL
CLOCK
REP
7 8 9 10 11 12 SCAN
MUTE 1 2 3 4 5 6 LOUD
MONO indicator
LOCAL indicator
Memorize
Select the station in Radio mode ( above)
Press and hold [D·M] until D·M indicator lights.
D-M
lights
Pressing continuously, frequency display will blink once and
new station will be overwritten on existing saved station.
D-M
blinks once
Preset Station Setting
Up to 6 stations each can be saved in the FM1, FM2, FM3
and AM preset station memories.
Note: Existing saved stations are overwritten with new
stations after following this procedure.
q
Band
Press [BAND] to select a desired band. ( page 8)
APM
POWER
7 8 9
MUTE 1 1 2 2 3 3
w Auto Preset Memory (APM)
Press and hold [BAND] (APM: auto preset memory) for more than 2 seconds.
• The 6 stations with good reception will be automatically sared in the memory under
preset buttons from [1] to [6].
• Once set, the preset stations are sequentially scanned for 5 seconds each.
Manual Preset Memory
Use manual or seek tuning to find a station.
( page 8)
Press and hold one of the preset buttons
from [1] to [6] until the display blinks once.
Mono/Local Selection (MONO/LOC)
MONO: Noise is significantly decreased when weak signals are received from an FM
broadcast station.
LOCAL: Only strong signals of stations are searched for in seek tuning, while at the
LOCAL OFF setting, relatively weak signals are also searched for.
• Press and hold [SEL] (MONO/LOC) more than 1 seconds to show the status,continu-
ously hold to change the mode per 1 second. Then, release when at the desired point.
FM broadcasts
Regular mode
1 second
MONO OFF / LOCAL OFF
Press and hold ...
1 second
MONO ON / LOCAL OFF
1 second 1 second
MONO ON / LOCAL ON
1 second
MONO OFF / LOCAL ON
Caution: To ensure safety, never attempt to preset sta-
tions while you are driving.
Display Change
Press [DISP] (display) to switch to the clock display.
Frequency Clock display
Preset
Station
CQ-DP153W
D•M
C
Calling
TUNE
TRACK
CLOCK
REP
10 11 12 SCAN
Press the correspon-
4 4 5 5 6 6 LOUD
ding preset button
from [1] to [6] to tune
in a preset station.
blinks once
AM broadcasts
Regular mode
1 second
(default)
LOCAL OFF
(default)
1 second
LOCAL ON
CQ-DP153W
E
N
G
L
I
S
H
4
9