Operation And Features Overview - Raymarine T300 Operation And Setup Manual

3.2 Operation and features overview

The camera features are accessed using the Thermal camera
application at a compatible multifunction display, or from a dedicated
JCU (Joystick control unit).
The main Thermal camera operations are outlined below:
Control the camera:
• Switch the camera between operational and standby modes.
• Pan and tilt
• Zoom
• Home position
• Pause the camera image
• Switch between visible light and thermal camera lenses. (Dual
payload only)
• Surveillance mode
Adjust the camera image:
• Color palette
• Scene presets
• Reverse video (white hot / black hot)
In addition to the above, the camera also provides setup menus to
configure the system to your requirements.
18
Thermal camera application – controls overview
The thermal camera application is available on some Raymarine
multifunction displays and systems. It includes controls for the
thermal camera.
Thermal camera application – hardkey controls
Rotary control / • Pan and tilt camera
trackpad
Note: On touchscreen systems you can
also use the touchscreen to pan and tilt
the camera.
• Navigate setup menus (when using the setup
OK Confirm menu selection
CANCEL Cancel selection
RANGE IN / OUT Zoom image in / out.
Thermal camera application – softkey controls
The softkeys available are shown as part of the thermal camera
application display.
options)
T-Series thermal cameras – Operation and setup