Panasonic CQ-VD6503N Operating Instructions Manual page 27

Traffic Announcement (TA)
PWR
SRC
TA TA
VOL
MUTE
P-MODE
ASPECT
ASP
TILT
[TA]
TA on/off
(Only for the button [TA] on the player)
Press [TA] to switch TA mode as follows.
TA ON
: Receive traffic programs automatically.
TA OFF
: TA is not active.
AF (Alternative Frequency)
AF on/off
Touch to switch AF mode as follows.
AF ON
: AF, Best Station Research and PI
seek function are active.
AF OFF
: When the AF network of an RDS
station is not required.
*The displayed contents on the touch panel vary with cir-
cumstances.
Note
:
The setup is the same way as the one from the MENU.
¡
(a page 29)
ALBUM
FOLDER
TUNE
TRACK
NAVI
CQ-VD6503N
AF on/off setting*
The following functions are available when the TA mode
is active.
A TP (Traffic program) station is automatically
¡
searched for and received at the instant of toggling the
TA mode on if you are receiving a non-TP station.
¡ When executing station search or APM, only TP sta-
tions are selected.
¡ Setting to TA on with the unit in another mode, it will
automatically switch to radio mode and output the
traffic announcement when the traffic announcement
begins. The traffic announcement having finished, the
unit will return to the previous mode (TA Standby
Mode (Except in the case of the menu screen)).
Traffic Information Only (TA Mute)
For listening to only traffic information, activate TA and
set the volume to 0 in FM mode.
Once traffic information starts, the volume changes to
the TA volume. (a page 29)
Note
:
Traffic information is available in monaural.
¡
The following functions are available when the AF mode
is active.
¡ When receiving conditions become bad, a station with
better receiving conditions is automatically tuned in to.
¡ When executing APM, only RDS stations are selected.
When calling up a preset station, a best receiving sta-
¡
tion is selected automatically. (BSR Best Stations
Research)
PI Seek
(Program Identification Seek)
If reception becomes poor when tuning in a preset sta-
tion, press the same preset number button. The same
station with better reception will be searched for.
Press the same preset number button again to cancel.
Note
:
For PI Seek, cancel the TA mode first, then execute PI
¡
Seek.
26
27
CQ-VD6503N