L I S H; Power And Sound Controls - Panasonic CQ-RG131U Operating Instructions Manual

Power and Sound Controls

E
N
G
L
I
S
H
1
Press and hold
Note: This unit is equipped with an anti-volume-blast circuit which serves as an automatic
volume level adjuster so that you will not be deafened with sudden loud volume.
This system operates as follows. When [PWR] is switched on, the volume level is low. After that,
the volume level gradually returns to the level as the same as the one before turning off.
Anti-volume-blast circuit is not effective when volume level is lower than position 20 at the display.
10
Power
Turn the key in the ignition until the accessory indicator lights.
Press [PWR] to switch on the power.
Volume
Press [VOL j
Press [VOL j
change numeric levels on the display rapidly.
Mute
Press [MUTE] to decrease volume level.
LOUD
"MUTE" blinks while this operation.
Press [MUTE] again to cancel.
Tone Enhancement
Press and hold [MUTE] (LOUD) for more than 2 seconds to
LOUD
enhance bass and treble tones when listening at low or medium
volume.
Press and hold [MUTE] (LOUD) for more than 2 seconds again
to deactivate when listening at higher volumes.
CQ-RG131U
LOUD
j ] or [VOL i i ] to increase or decrease volume.
0 to 39
j ] or [VOL i i ] for more than 0.5 second to
Volume Level