Bos Specifics - Biomega BOS Manual

BOS SPECIFICS

The BOS/Boston bicycle is designed with a special DT-wire lock system. Therefore this bike needs comprehensive explanations.
DT-wire Tension
DT-wire is factory adjusted. A correctly adjusted DT-wire ensures that the bike can be locked/unlocked and that the bike frame is stable while riding.
The DT-wire should never be too tight or too loose. If for any reason the cable adjustment has been modified, follow the manual directions to ensure
HOW TO LOCK/UNLOCK THE BIKE:
1. Open the lock with the supplied key.
2. Move handle backwards (from handlebar to seat) to loosen DT-wire, and remove key.
3. Detach the left wire hook from locking box and the lower wire-loop from the hook.
4. Take the detached wire-loop and put it around a grounded object (a lamp post, a bench, a tree, etc.).
5. Return the free hook to locking box.
6. Move handle forward (from seat to handlebar), until it locks itself in a vertical position.
WARNING: Never ride the bicycle with the key in open position, or with the lock lever/handle in open position, or the DT-wire hanging loose!!! To avoid
injury, always make sure that the wire is securely fastened in the locking box and the hook.
19 20