Setup; Wan - VTech VNT814 User Manual

Configure your router

Setup

The Setup menu allows you to configure the functions of the router. Choose
this menu and you can see the next sub-menus: WAN and LAN.

WAN

WAN configuration:
Click the Setup menu. The WAN Configuration page under the WAN
•
sub-menu in the left pane is opened automatically. You can configure the
parameters for the WAN interface of your router, such as channel mode, PPP
settings and WAN IP settings.
• Auto Bridge: Enable or disable the Auto Bridge Mode. If it is enabled,
the child VNT814 router's DCHP mode will change to DCHP Relay
automatically. See DCHP mode on page 17 for more details.
• Channel mode: It can be Bridge, IPoE or PPPoE.
• Enable NAPT: Enable or disable the NATP function.
• Enable IGMP: Enable or disable the IGMP function.
• User Name: User name of the PPP connection
• Password: Password of the PPP connection.
• Type (PPP settings): Continuous, Manual or Connect On Demand.
• Idle Time (min): The idle time of the PPP connection when the type is
Connect On Demand.
• Type (WAN IP settings): Fixed or DHCP.
• Local IP address: The IP address of the router.
• Remote IP address: The gateway's IP address of the router.
• Netmask: The subnet mask of the router.
• Default Route: The mode of the default route of the router.
15