Configure your router
Setup
The Setup menu allows you to configure the functions of the router.
Choose this menu and you can see the next sub-menus: WAN and LAN.
WAN: WAN Configuration
Click the Setup menu. The WAN Configuration page under the
WAN sub-menu in the left pane opens. You can configure the
parameters for the WAN interface of your router, such as channel
mode, PPP settings and WAN IP settings.
•
Auto Bridge: Enable or disable the Auto Bridge Mode. If it is enabled,
the child VNT832 router's DCHP mode will change to DCHP Relay
automatically. See DCHP mode on page 21 for more details.
•
Default Route Selection: Auto, Specified.
18