Rear Door Security Locks; (Crew Cab Models); Headlamp Controls - GMC Canyon 2004 Owner's Manual

Rear Door Security Locks

(Crew Cab models)

Crew Cab models are equipped with
rear door security locks that allow you to
lock the rear doors so they cannot be
opened by passengers from the inside.
The lock switch (shown above) is locat-
ed on the inside edge of each rear door.
Engage the rear door security locks
• Open a rear door and insert your
ignition key into the lock.
• On the driver's side rear door, turn
the key clockwise to engage the rear
door security lock (turn it counter-
clockwise on the opposite side rear
door).
• Close the door.
Open the rear door when the security
lock is on
• Unlock and open the door from
outside the vehicle.
Return the rear doors to normal use
• On the driver's side rear door, insert
the key and turn the lock counter-
clockwise (turn it clockwise on the
opposite side rear door).
See Section 2 of your Owner Manual.

Headlamp Controls

The exterior lamps control is located on
the instrument panel to the left of the
steering wheel.
Turn off all exterior lamps, including
the Daytime Running Lamps
• Turn the knob to the OFF position
( ).
Activate the automatic headlamp sys-
tem that illuminates all exterior lamps
and the instrument panel/radio lights
when they are needed
• Turn the knob clockwise to the AUTO
position.
Manually illuminate the parking
lamps, exterior tail/side-marker lamps
and instrument panel/radio lights
• Turn the knob clockwise to this
position ( ).
Activate the headlamps, exterior
tail/marker lamps and instrument
panel/radio lights
• Turn the knob clockwise to this
position ( ).
See Section 3 of your Owner Manual.
9