Remote Control Overview; Front & Rear Panel Overview; Front Panel View - Apex Digital AD1115 User Manual

Remote Control Overview

1 16
17
2
18
19
20
3 21
4 22
5
23
6
24
7
25
8
26
9 27
10
28
11
29
12
13
14 30
15
31
Important:
Certain features may not operate if the disc does not
support the feature, or requires special settings.
Check the feature content printed on the disc's packaging.
Notes:
The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the infrared sensor
during operation. When the sensor is covered or there is a large object between the remote control and the sensor will
not receive a signal. The sensor may not be able to receive signals properly when it is exposed to direct sunlight or
strong artificial light (such as a fluorescent or strobe light). In this case, change the direction of the light or reposition the
unit to avoid direct lighting.
7
1 Power On/Off
2 Numeric Entry Pad
3 Shuffle
Program
4
5 I/P (Interlace/Progressive Scan Modes)
6 Resume
7 Slow
8 Step
9 Setup
10 Audio
11 Menu
12 Cursor Keys: Up / Down / Left / Right
13 Enter/Play
14 Pause
15 Skip, Next/Previous
16 Disc Tray Open/Close
17 Volume Adjust +/-
18 Repeat
19 A-B Repeat
20 Mute
21 GoTo
22 Clear
23 Display
24 AFF
25 Zoom
26 P/N (PAL/NTSC/AUTO Modes)
27 Angle
28 Sub-T (Subtitle)
29 Title
30 Stop
31 Fast Forward/Reverse
Front & Rear Panel Overview

Front Panel View

Power On/Off
Disc Tray
Back Panel View
Coaxial Digital Output
8
Open/Close
Play/Pause
Stop
IR Sensor
Composite Video
Output
S-Video
Analog /Down
Output
Mix Audio
2 channel L/R