Repeat Playback; Resuming The Previous Playback - Panasonic AG-HMC70P Operating Instructions Manual

Playback

Repeat playback

Playback of the first scene starts after playback
of the last scene finishes.
Press the MENU button, then select
[PLAY SETUP]
#
[ON] and press the center of the
cursor button.
The [ ] indication appears on the thumbnail
and full screen views.
≥The following scenes can be played back
repeatedly.
– When [PLAY MODE] is set to [VIEW ALL]:
All the scenes on the SD card
– When [PLAY MODE] is set to [BY DATE]:
All the scenes on the selected date
To cancel the repeat playback function
Press the MENU button, then select
[PLAY SETUP] # [REPEAT PLAY] # [OFF] and
press the center of the cursor button.
≥Even if the power is turned off, the repeat
playback setting is retained.
70
[REPEAT PLAY]
Resuming the previous
playback
If playback of a scene was stopped halfway, the
playback can be resumed from where it was
stopped.
#
Press the MENU button, then select
[PLAY SETUP]
[ON] and press the center of the
cursor button.
If playback of a motion picture is stopped, [
appears on the thumbnail view of the stopped
scene.
To cancel the resume playback function
Press the MENU button, then select
[PLAY SETUP] # [RESUME PLAY] # [OFF]
and press the center of the cursor button.
≥The memorized resume position is cleared if
you turn off the power or operate the mode dial.
(The [RESUME PLAY] setting is kept.)
[RESUME PLAY]
# #
]