Specifications - Panasonic SC-HC3P Service Manual

4 Specifications

Amplifier Section
RMS Output Power Stereo Mode
Front Ch (both ch driven)
Phone jack
Terminal
Output level (CD, 1 kHz, -20 dB)
Aux (Rear)
Sensitivity
Normal level
High level
Terminal
Tuner Section
Preset memory
Frequency Modulation (FM)
Frequency range
Antenna terminals
Amplitude Modulation (AM)
Frequency range
Disc Section
Disc played [8 cm or 12 cm]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3)
(3) MP3
* MPEG-1 Layer 3, MPEG-2 Layer 3
Pick up (CD)
Wavelength
Laser power
Audio output (Disc)
Number of channels
Audio performance (CD-Audio)
Frequency response
S/N ratio
Dynamic range
Total harmonic distortion
Speaker Section
Type
Speaker unit(s)
Full range
Impedance
Input power (IEC)
Output sound pressure
Frequency range
General
Power supply
Power consumption
Dimensions (W x H x D)
Mass
Operating temperature range
Operating humidity range
Power consumption in standby mode 0.2 W (approx)
20 W per channel (6 Ω), 1 kHz, 10
% THD
Stereo, 3.5 mm jack
max. 1.18 mW +1.18 mW, 32 Ω
630 mV, 12.4 kΩ
630 mV, 12.4 kΩ
Stereo, 3.5 mm jack
FM 30 stations
AM 15 stations
87.9 MHz to 107.9 MHz
(200 kHz step)
87.5 MHz to 108.0 MHz
(100 kHz step)
75 Ω (unbalanced)
520 kHz to 1710 kHz
(10 kHz step)
795 nm
CLASS 1
FL, FR, 2 channel
4 Hz to 20 kHz
95 dB
93 dB
0.005 %
1 way, 1 speaker system (Bass
reflex)
6.5 cm Cone type
30 W (Max)
79 dB/W (1.0m)
55 Hz to 25 kHz (-16 dB)
90 Hz to 22 kHz (-10 dB)
AC 120 V, 60 Hz
28 W
500 mm x 195 mm x 102.5 mm
(19 11/16" x 7 11/16" x 4 1/16")
[D = 69 mm (2 3/4") minimum]
Approx. 3 kg (6.6 lbs)
0°C to +35°C (+32 °F to +95 °F)
35% to 80 % RH (no condensa-
Notes :
1. Specifications are subject to change without notices. Mass and
dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum ana-
lyzer.
6 Ω
tion)
10