System Config - Panasonic BT-LT80W Menu Information

Panasonic broadcast camera field monitor menu information
Table of Contents

Advertisement

Main Menu
(continued)

SYSTEM CONFIG

Sub menu
CONT. /BACK.
BACKLIGHT
PEAKING/PHASE
STATUS DISPLAY
BATTERY REMAIN
SETUP LOAD
SETUP SAVE
PWR ON SETUP
∗ 1 Functions as CONTINUE when
P-P
or when the
∗ 2 USER saving is not possible when CONTROL is set to REMOTE.
Settings
Explanation
BACKLIGHT
Used to select the function to be assigned to CONT/B.LIGHT (a knob
CONTRAST
on the front panel).
<BACKLIGHT> Used to adjust BACKLIGHT.
<CONTRAST> Used to adjust CONTRAST.
0 - 60
Used to adjust the LCD backlight level.
<Note>
CONT./BACK displays "-" while BACKLIGHT settings are performed.
PEAKING
Used to select the function to be assigned to PEAK/PHASE (a knob
PHASE
on the front panel).
<PEAKING> Assigns to the PEAKING function.
<PHASE>
CONTINUE
Used to set the display time for the status display.
3SEC OFF ∗
<CONTINUE> Always displayed.
1
OFF
<3SEC OFF> Displayed for 3 seconds.
<OFF>
OFF
Used to select whether or not to display the battery level.
ON
<OFF> Not displayed.
<ON> Displayed.
FACTORY
Used to load the saved factory preset setting values (FACTORY) or
USER1
user data (USER 1 - USER 5).
USER2
<FACTORY> The factory preset settings.
<USER1 - 5> The saved USER data ∗
USER3
USER4
When the unit is shipped from the factory, the USER 1 to 5 data items
USER5
are the same as the factory preset values.
USER1
Used to save user data.
USER2
Up to 5 sets of user data can be saved, which include the current
USER3
setting values for the menu and picture adjusting knobs.
USER4
USER5
LAST
Used to select the settings for when the power supply is switched
FACTORY
ON.
USER1
<LAST>
USER2
USER3
<FACTORY> Starts up with the FACTORY settings.
USER4
<USER1 - 5> Starts up with the settings that are saved in a USER
USER5
(warning of improper operation status for the camera settings) is displayed
(PIXEL TO PIXEL) status is displayed.
The underlined values are factory preset setting values.
Assigns to the PHASE function.
Not displayed.
Starts up with same settings as the last time the power
supply was switched OFF.
item.
.
2
21

Advertisement

Table of Contents
loading

Table of Contents