Panasonic BT-LT80W Menu Information page 5

Panasonic broadcast camera field monitor menu information
Table of Contents

Advertisement

User Data
You can change the menu setting values and picture adjusting knob settings, then save and load up to 5 combinations
of screen adjustment values as user data. You can also return the setting values and adjustment values to the
factory preset settings.
The following settings are included in user data.
• Menu settings except for "SETUP LOAD/SAVE" and "REMOTE of CONTROL" (including the button function
settings on the front of the monitor)
• Screen adjustment values changed in picture adjusting knob
Saving user data
1. Push [MENU] to display the MAIN menu.
2. Push [
,
] to select the "SYSTEM CONFIG"
menu and push [ENTER].
3. Push [
,
] to select the "SETUP SAVE" sub
menu and push [ENTER].
The setting values in the sub menu change to
green.
[SYSTEM CONFIG]
CONT./BACK.
BACKLIGHT
PEAKING/PHASE
STATUS DISPLAY
BATTERY REMAIN
SETUP LOAD
SETUP SAVE
PWR ON SETUP
EXIT
SEL.
MENU
4. Push [
,
] to select the file you wish to save to
from "USER1" – "USER5", then push [ENTER].
The following screen appears.
[ SETUP SAVE ]
USER1
YES
NO
EXIT
SEL.
MENU
5. Select "YES", and push [ENTER].
The user data is saved.
To return to the previous screen
Push [MENU].
BACKLIGHT
--
PEAKING
3SEC OFF
OFF
FACTORY
USER1
LAST
ENTER
ENTER
Changes to green
SET
ENTER
Loading user data
1. Push [MENU] to display the MAIN menu.
2. Push [
,
] to select the "SYSTEM CONFIG"
menu and push [ENTER].
3. Push [
,
] to select the "SETUP LOAD" sub
menu and push [ENTER].
The setting values in the sub menu change to
green.
[SYSTEM CONFIG]
CONT./BACK.
BACKLIGHT
PEAKING/PHASE
STATUS DISPLAY
BATTERY REMAIN
SETUP LOAD
SETUP SAVE
PWR ON SETUP
EXIT
MENU
4. Push [
,
] to select the file you wish to load to
from "USER1" – "USER5", then push [ENTER].
The following screen appears.
To return to the factory preset setting values, select
"FACTORY".
[ SETUP LOAD ]
USER1
YES
NO
EXIT
MENU
5. Select "YES", and push [ENTER].
The user data is loaded.
BACKLIGHT
--
PEAKING
3SEC OFF
OFF
FACTORY
USER1
LAST
SEL.
ENTER
ENTER
Changes to green
SEL.
SET
ENTER
15

Advertisement

Table of Contents
loading

Table of Contents