Video Config - Panasonic BT-LT80W Menu Information

Panasonic broadcast camera field monitor menu information
Table of Contents

Advertisement

Main Menu
(continued)

VIDEO CONFIG

Sub menu
COLOR TEMP.
SHARPNESS
MODE
SHARPNESS H
SHARPNESS V
I-P MODE
MONO ∗
4
SD ASPECT ∗
4
∗ 1 When selecting USER 0 - 63
1) Push [ENTER] (USER changes to blue).
∗ 2 When "VAR1", "VAR2" or "VAR3" is selected, the monitor switches to WB adjustment mode (→ page 20).
∗ 3 The following sharpness values can each be set,
1) VIDEO system input line (VIDEO)(Factory settings are SHARPNESS MODE: LOW, SHARPNESS H/V: 0)
2) any other input line's HD (Factory settings are SHARPNESS MODE: HIGH, SHARPNESS H/V: 0)
3) any other input line's SD (Factory settings are SHARPNESS MODE: LOW, SHARPNESS H/V: 0)
and the setting values for the selected input signal from within this group is displayed. The adjustment status is
displayed in the bottom right when selected.
∗ 4 During GPI control, the setting items are displayed in gray and the display changes in accordance with the GPI
control.
Settings
Explanation
USER 63 ∗
Used to select the color temperature.
1
D93
<USER 0 - 63> Adjustable settings 0 - 63
D65
D56
<D93>
<D65>
VAR1
VAR2
<D56>
<VAR1>
VAR3
<VAR2>
<VAR3>
HIGH ∗
Used to select the width of the sharpness edge.
3
<HIGH> Thin edge
LOW
0 - 30 ∗
Used to set the sharpness in the horizontal direction.
3
When adjusting, the item display moves to the lower part of the
screen.
0 - 30 ∗
Used to set the sharpness in the vertical direction.
3
When adjusting, the item display moves to the lower part of the
screen.
MODE2
Used to select IP conversion mode. (→ page 20 "About IP Mode")
MODE1
<MODE2> Field Interpolation
OFF
Used to switch between color and monochrome (MONO).
ON
<OFF> Color
∗ When this is ON, the picture adjusting knob [CHROMA] setting is
fixed at 0.
4:3
Used for setting the aspect ratio settings when using SD signal
16:9
input.
<4:3> 4:3 display
The underlined values are factory preset setting values.
(color temperature around 3000K - 9300K)
Color temperature around 9300K
Color temperature around 6500K
Color temperature around 5600K
WB adjustment mode ∗
WB adjustment mode ∗
WB adjustment mode ∗
2) Select 0 - 63 with [
2
2
2
<LOW> Thick edge
<MODE1> Frame Interpolation
<ON> Monochrome
<16:9> 16:9 display
,
], and push [ENTER].
19

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BT-LT80W and is the answer not in the manual?

Questions and answers

Table of Contents