Advertisement
SOUNDSTICKS
Specifications*
System
Frequency range: 44Hz – 20kHz
Power consumption: 4W idle, 65W maxi-
mum
Subwoofer
Transducer (1): 6" woofer
Amplifier output power: 20W RMS
Dimensions (W x H): 9-3/16" x 10-3/16"
(232mm x 258mm)
Weight: 4 lb (2.2kg)
Satellite
Transducers (4): 1" full-range per channel
Amplifier output power: 10W RMS per
channel
Dimensions (W x H): 2" x 10" (51mm x
254mm)
Weight: 1.5 lb (0.7kg)
Troubleshooting
Symptom
No sound from SoundSticks III speaker
system.
*These specifications are subject to change without notice.
4
III
®
Step 1. Place individual
Step 2. Place subwoofer
SoundSticks III (satellites)
as desired, but placement
beside monitor/computer.
under your desk will
provide optimal perfor-
mance.
Possible problem
No power to subwoofer.
Power adapter plug not inserted cor-
rectly.
No volume or low volume.
Step 3. Connect satel-
lite cables to the dual
subwoofer cable. Also
connect the input cable
to the subwoofer input
cable jack.
Solution
Ensure power supply is connected to live power source and is properly
connected to subwoofer. Please note: When subwoofer is powered, a
power LED should light.
Place plug with arrow symbol facing UP into the subwoofer.
Touch the volume "Up" (+) pad on the volume control satellite to
unmute and/or increase the system volume level.
Note: Touching the volume "Down" (–) pad lowers the system volume.
Touching both (+) and (–) volume control pads at the same time will mute
the system.
Step 4. Insert Sound-
Sticks III input cable into
the computer or other
audio device.
Advertisement
