To Disconnect Usb Cable Safely - Panasonic VDR-D300 Operating Manual (English, Spanish) Operating Instructions Manual

12 Click [Create Menu] (A) and edit the DVD menu as
required, then click [Write to Disc] (B).
13 Check [Create disc] (A), select the drive to be
used (B) and then click [Write] (C).
14 Insert a brand-new 12 cm (5z) DVD-RW or DVD-R disc into
the disc drive and click [OK].
≥ 12 cm (5z) iRW and iR discs can also be used if the disc drive supports them.
15 Proceed with the write setting and then click [OK].
Writing to the disc starts.
≥ Depending on the amount of data, writing to the disc may take time.
≥ When the unit is connected to a computer, the
operation mode cannot be changed and its
power cannot be turned off.
In this case, disconnect the USB cable (l below).
≥ When the unit is connected to a computer in disc
playback mode, no image will appear on the LCD
monitor or viewfinder.
≥ When this unit is connected to a computer, you
cannot use this unit's DISC EJECT lever to remove
a disc. Use the software's eject button to eject the
disc.

To disconnect USB cable safely

When the drive icon is displayed on the desktop:
Drag the icon into the Trash and then disconnect the USB cable.
When the drive icon is not displayed on the desktop:
Exit the application and then disconnect the USB cable.
≥ If you disconnect the USB cable while the access
lamp is on, it may damage the data.
Using discs on a computer (Macintosh)
A
B
≥ When a computer is accessing a disc in this unit,
the ACCESS/PC lamp lights. Do not disconnect the
USB cable or AC adaptor while the disc is being
accessed as it may damage the data.
A B
C
139
LSQT1011