Creating A Dvd-Video Disc On A Computer (Windows); Creating A Dvd-Video On A Computer From A Dvd-Ram Or Dvd-Rw (Vr Format) - Panasonic VDR-D300 Operating Manual (English, Spanish) Operating Instructions Manual

Creating a DVD-Video disc on a computer
(Windows)
Creating a DVD-Video on a computer from a DVD-RAM or
DVD-RW (VR format)
Using DVD-MovieAlbumSE and DVDfunSTUDIO, you can create a DVD-Video disc (DVD-RW/
DVD-R disc) from the images recorded on this unit.
≥ Before using DVD-RW (VR format) on a computer, be sure to finalize it on this unit.
≥ When using DVD-MovieAlbumSE or DVDfunSTUDIO, log on to your computer as Administrator
with a login name equally authorized. If you log on with a login name other than Administrator,
you cannot use the applications.
≥ The End User License Agreement is displayed when the software is first started so read carefully
through its terms and conditions, then click [I agree.].
¬ Connect this unit to the AC adaptor.
1 Insert a DVD-RAM or DVD-RW (VR format) with recorded images in the
unit, turn on the unit and then rotate the mode dial to select
2 Connect this unit and a computer.
A USB cable (supplied)
≥ Insert the plugs as far as they will go. The unit
and computer will not operate properly if the
plugs are not inserted fully.
≥ Do not use any other USB cables except the supplied
one. (Operation is not guaranteed with any other USB
cables.)

Creating a DVD-Video disc on a computer (Windows)

.
A
127
LSQT1011