Lnb Settings; Quad - Megasat SAT IP Server 2 User Manual

4. System Settings
The Green color tick icon is dis-
played if WiFi Router is connec-
ted without any problem. All WiFi
network settings are stored in the
system memory.
Wireless can be configured by Ma-
nually. To connect the Box to WiFi
router user need to provide the
Device information.
If users pressing OK key the base
station will be opened. Further
procedure will be same as exp-
lained for Auto mode.
14
ENGLISH
4. System Settings

4.2 LNB Settings

Select the type of LNB that is connected to Satellite input of your box based on your
satellite installation. Topics covered under are listed below:

Quad

Select „Quad" when a Quad LNB, Octo LNB or Universal multiswitch is connected to your
Server box.
Quattro (Quattro LNB)
Select „Quattro" when a Quattro LNB is connected to your Server box directly.
Unicable (Unicable LNB or Unicable multiswitch)
Select „Unicable" when a Unicable switch is connected to your Server box
JESS
Select „Jess" when a Jess switch is connected to your Server box.
DiSEqC1.2
Select „DiSEqC" when a DiSEqC1.2 motor is connected to your Server box.
USALS
Select „USALS" when a USALS motor is connected to your Server box.
How to Access?
Click „LNB Setting" from the Server page.
ENGLISH
15