Table of Contents
Advertisement
With a
computer
●
Before installing the software, check your operating environment (P.76) and
close any other software applications which are running.
●
Do not perform other computer operations while installing the software.
●
Do not connect this unit to the computer until installation is complete.
Install VideoCam Suite only from the supplied CD-ROM.
●
Insert the supplied CD-ROM into your computer.
The installation program begins automatically and the message appears on
the screen.
Select the folder where the application will be installed and click [Next].
Decide whether to create a shortcut.
[Readme] is displayed when the installation is completed. Be sure to check
the contents.
78
VQT2A17
4
Installing VideoCam Suite
Click [Next].
Select the country or region where you live and
click [Next].
●
Check the message prompting you to confirm
and click [YES].
●
If you cannot select your country or region, click
[NTSC Area].
Click [Install] and follow the directions appearing
on the screen to complete the installation.
●
If the installation is interrupted halfway through,
the software may not operate properly.
●
If using Windows 2000, Microsoft DirectX 9.0c
must be installed in order to operate VideoCam
Suite 2.0. Depending on the operating
environment, you may be required to install
DirectX 9.0c. If so, follow the instruction on the
screen and install it. If you install the software
on a PC that is not compatible with DirectX 9.0c,
the PC may not work properly. If you are unsure
whether or not your PC is compatible, contact
the PC manufacturer.
- Quick Links:
- Operating Instructions
- Charging
Hide quick links:
Advertisement
Table of Contents
