Panasonic SDR-SW21P Operating Instructions Manual page 11

6
Open the terminal cover.
Lift the flap upright and turn it
counter-clockwise until it clicks for
unlocking and then open the cover.
Plug the DC plug into the
7
DC input terminal on the
unit.
Status indicator
Flashing red: Charging in
Off: Charging complete
progress
Setting the date and time
Set the mode dial to
1
a position other than
[OFF].
Select [YES].
2
Set the date and time.
3
To select settings
Enter the date and time.
4
• This procedure is for setting the
date and time the very first time. For
the setting procedure for the second
and subsequent times (P.30).
To change
numerical values
11
VQT2A17