Table of Contents
Advertisement
POWER CONNECTION
Connecting Power
Plug the supplied AC power cord into the AC jack that located on the rear of the product and plug the
other end into a standard AC socket. The unit is designed to operate from a main supply of AC
120V~60Hz.
CAUTION: The supplied AC power cord has a polarized plug that fits into the wall outlet only one way.
If the plug does not fit properly, turn it over and try again. Do not force it.
NOTES: When the unit is not operated by the AC power or unused for long periods of time, please
remove the AC mains plug from the wall outlet and unplug from the main unit.
Battery Operation
Remove
The AC power cord MUST be disconnected from the unit, otherwise it will not operate on battery power.
1.
Use only the size and type of batteries specified.
2.
Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. Reversed batteries may cause damage to the device.
3.
Do not mix different type of batteries together (e.g. Alkaline and Carbon Zinc) or old batteries with
fresh ones.
4.
If the device is not to be used for a long period of time, remove the batteries to prevent damage or
injury from possible battery leakage.
5.
Do not try to recharge batteries not intended to be recharged, they can overheat and rupture
(Follow battery manufacturer's directions).
6.
Rechargeable batteries are to be removed from the product before being charged.
7.
Rechargeable batteries are only to be charged under adult supervision.
8.
Exhausted batteries are to be removed from the product.
9.
The supply terminals are not to be short-circuited.
10.
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
EN - 6
Advertisement
Table of Contents
