Table of Contents
Advertisement
With a
computer
Importing motion pictures and still pictures
When this unit is connected to the computer, VideoCam Suite starts up
automatically.
●
To use the application with Windows Vista, log on with administrator
authorization or via a standard user account. Guest accounts cannot be used.
To use the application with Windows XP or 2000, log on with administrator
authorization.
Connect the unit and AC adaptor (P.20) and set the mode dial to a position
other than [OFF].
Connect this unit to a computer using the USB cable (supplied).
Select [PC/RECORDER] on the [SELECT USB FUNCTION] screen of the
unit.
VideoCam Suite is automatically launched.
●
Do not use any other USB cables except the supplied one. (Operation is not
guaranteed with any other USB cables.)
●
Do not disconnect the USB cable or shut off the power while the card
access lamp is lit.
●
The first time the unit is connected to the computer, the computer may have to
be restarted.
●
To output motion pictures edited with VideoCam Suite to SD cards, use an
applicable SD card. (P.18)
●
When outputting a large number of scenes to an SD card, DVD-R/RW or
DVD-RAM, it may take time to display thumbnails or to output.
82
LSQT1426
5
Using VideoCam Suite
Insert the plugs as far as they will go.
Advertisement
Table of Contents
