Advertisement
&
Shelves in the fresh food and
freezer compartments are adjust-
able, enabling you to make efficient
shelf arrangements to fit your
family's food storage needs.
TOremove shelves: Tilt shelf up
at front, then lift it up and out of
tracks on rear wall of refrigerator.
El
Engage
top lug
~
Lower
to
lock
into place
To replace sheives:Select desired
shelf height. With shelf front raised
Slightiy,
engage top lugs in tracks
at rear of cabinet. Then lower front
of shelf until it locks into position.
TOremove shelves: Lift shelf
straight up until mounting hooks
disengage.
To relocate shelves: Select desired
shelf height, engage hooks in slots
on the tracks of the door, and push
in. Shelf will lock in place.
S1-w?lves
in
i%ree~~~
Shelves in the freezer compartment
are easily removed and replaced.
T' remove shelves:
1. While pressi
tabs on shelf
supports on rig
wall, lift shelf o
of grooves in
supports.
2. Pull shelf
sideways until
rods come out of
holes on left wall.
To mqdace shelves: Insert rods into
holes. Then, while pressing tabs,
lower shelf into grooves in supports.
Be sure shelf wire is fully inserted
into grooves.
The Cmver'tible Meat Pan drawer
has its own cold air duct to allow a
stream of cold air from the freezer
compartment to flow around the
drawer.
The variabletemperaturecontrol
regulates the air flow from the
freezer compartment,
/
~.
Set control lever to MEATS–the
coldest setting—to store fresh
meats If lever is left in meats posi-
tion for a long period of time, some
frost may form on the inside of the
drawer.
Set control lever to VEGETABLES
to convert the drawer to normal re-
frigerator temperature and provic%
extra vegetable storage space. Cold
air duct is turned off.
Variable settings between these
extremes can be selected.
10
Advertisement
