Table of Contents
Advertisement
3. Settings
Before recording, you can set up the device according to your requirements.
- In video/picture preview mode, press [MENU] to enter video/picture
settings, press it again go the general settings, press it third time to exit.
- In setting list, use [ ]/[ ] to navigate the menu, press [OK] to get the
options and confirm the selection, press [MENU] to exit.
Video settings
• Resolution: Select the resolution of recorded video: 1280x720, 848X480, 640x480.
• Time stamp: Add date and time stamp onto videos.
• Motion detection: Turn on or off motion detection. If there is any motion detected while the car
engine is stopped, your car DVR will start recording automatically.
• Video time: Set the video duration (1, 2, 3, 4, 5 minutes or off) for loop recording. When the
microSD card is full, the device will delete the oldest unlocked video file automatically.
• Mic. on/off: Set to turn the microphone on or off.
Picture settings
• Size: Select the picture image size from 1.3M, VGA.
• Time stamp: Add date and time stamp onto pictures.
• Shutter sound: Set to turn on or off shutter sound.
General settings
In preview mode, double press [MENU] twice to enter general settings.
• Format: Format the memory card.
Formatting will erase all your stored data. Back up your data before proceeding.
• Language: Choose your language.
• Auto off: Set automatic power off when the device is not in use.
• LCD auto off: Set automatic LCD off when the device is not in use, press any button to wake up.
• Sys. reset: Restore to default settings.
• Light freq (frequency): For a given luminance, the frequency of light fluctuation that evokes a
sensation of flicker. Set a right flickering frequency to avoid horizontal stripe interference.
• Date input: Set date and time on device.
• Date format: Set date format on device.
• Key tone: Turn on or off the sound when pressing buttons.
• Firmware version: Display the current system version.
User Manual
RoadRunner 300I
3
3
Advertisement
Table of Contents
