Editing Mode; Recording From A Tape Onto A Card; Recording Pictures From A Card Onto A Tape; Audio Dubbing (Optional Remote Control Only) - Panasonic PV-GS16 Operating Instructions Manual

Editing Mode

Recording from a Tape onto a Card

Still pictures can be recorded on the Memory Card
from scenes that have already been recorded on a
cassette.
1
Set the Mode Dial
Mode.
38
2
Start playback and set the Camcorder to
Still Playback Mode at the scene you wish
to record, and press the [PHOTO SHOT]
Button .
35
35
Recording Pictures from a Card
onto a Tape
Card Images can be recorded to the Tape.
1
Set the Mode Dial
Mode.
38
2
Display the fi rst picture.
3
Press the [PHOTO SHOT] Button
35
• During the copying, the following Indication
appears.
• It takes a few seconds to record a picture to the
Tape.
to Tape Playback
38
38 to Picture Playback
.
35
Editing Mode
• When recording to tape, select the tape position
before recording. The picture will be recorded to the
tape position when the [PHOTO SHOT] Button is
pressed at Step 3.
• Photoshot index signals are automatically recorded.
• For other notes concerning this item, see page 59.
Audio Dubbing (Optional Remote
Control Only)
This feature is only available with Remote Control.
However it is not supplied. If you would like to order,
the parts number is LSSQ0411 as a replacement
parts. Please refer to page 68.
You can add music or narration to the recorded
Cassette.
• If the tape recorded in the [16bit] Mode is dubbed
with the Audio Dubbing function, the original sound
is erased. (If you wish to preserve the original sound,
use the [12bit] Mode when recording.)
• Audio Dubbing cannot be performed on a recording
made in LP Mode. (p. 21)
1
Press the [ ] Button
Control where you want to add new sound.
2
Press the [A.DUB] Button
Remote Control.
3
To start Audio Dubbing, press the [ ]
Button
To Cancel Audio Dubbing
Press the [
The Camcorder is in the Still Playback Mode again.
To Play Back the Sound Recorded by
12bit Audio Dubbing
Set [TAPE PLAYBACK MENU] >> [PLAYBACK] >>
[12bit AUDIO] >> [ST1], [ST2] or [MIX].
ST1: It plays back only the original sound.
ST2: It plays back only the sound added by Audio
Dubbing.
MIX: It plays back both the original sound
and the sound added by Audio Dubbing
simultaneously.
on the Remote
67
53
on the Remote Control.
67
] Button 67 on the Remote Control.
53
67
on the
41