Panasonic Palmcorder MultiCam PV-DV203 Operating Instructions Manual page 62

PHOTOVU/MPEG4 Movie Messenger™ System
Running the PHOTOVU/
MPEG4 Movie Messenger™
System*
* PHOTOVU: You can transfer Still images
from your Palmcorder tape to a PC.
MPEG4 Movie Messenger™ System:
You can transfer Motion images from your
Palmcorder tape to a PC.
While PHOTOVU/MPEG4 Movie Messenger™ System is running,
do not perform the following operations...
The PC system may become unstable.
• Change the screen area or color pallet in the Display Properties window.
• Turn the Palmcorder power switch ON or OFF while connecting the Palmcorder to your
PC using the USB Cable or DV Interface Cable (i.LINK).
• Change the Palmcorder power switch (VCR/CAMERA).
*You must first close the application.
• Connect/disconnect the DV Interface Cable (i.LINK).
• Connect/disconnect the USB Cable.
62
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Before you begin
• Insert a recorded tape. (p. 12)
1
Set Palmcorder POWER to VCR.
2
Connect the Palmcorder to your PC
using the USB Cable (supplied) or
DV Interface Cable (i.LINK) (not
supplied). (pp. 60, 61, 72)
3
Click on "Start," "(All) Programs,"
"Panasonic," "MPEG4
MovieMessenger System 1.01," then
"MovieMessenger."
4
"PHOTOVU/MPEG4 MovieMessenger
System 1.01" is opened.
Note
Refer to Help on program for information
about application operations and Error
messages.