Advertisement
Available languages
Available languages
Before use,
- Place the key into the security metal lock rim present on display.
- Before connecting the appliance to the mains, check that the voltage indicated on the
rating label corresponds with electrical outlet.
INSTRUCTIONS FOR USE
Remarks: Do not stand on the walking belt before you have booted the treadmill, but climb
up on the plastic platforms on the side of the belt and keep the handrail. Start exercising
after verifying that the treadmill is working properly.
The treadmill can reach high speeds. Adjust the speed in small increments.
During the exercise, attach the plastic clips on your clothing.
1. Insert the plug into a household power socket 220V AC.
2. Make sure the cables are connected properly, and then turn the switch located on the
front of the treadmill, see picture below, the display shows "----" in blue. Enter the
security key, the system goes into standby mode, the display shows: P (pulse) and 0 (for
other values).
3. Press the "START" button of the computer in standby mode (or press START on the
left side of the handlebar), the system is in manual mode, the machine begins to move
at speed 1.0 km / h after 3 seconds of the countdown shown on the display. Press
SPEED
or
to verify that the speed is changed regularly and the treadmill is
GB
21
Advertisement
