Step 1:
Step 2:
Step 3:
Note: Once you have assembled correctly, removes the lock side of the platform, see image
below.
20
Assemble
the two uprights onto
the platform. Pass through the right
upright the connecting wires of the
signal, to pass more easily the cable
inside the upright use the white wire.
Fix the 2 uprights to the platform with
the supplied bolts.
Assemble the handlebar: Connect
the power cord of the signal to the
computer and attach the handle to the
uprights with bolts.
Attach the support bar: Fix the bar to
the uprights using the long bolts.
Insert
the
plastic
handlebars near to the uprights.
GB
parts
on
the