Tool Menu; Asus Ez Flash 2 Utility; Asus Overclocking Profile; Load Profile - Asus Z97-PRO GAMER User Manual

2.9

Tool menu

The Tool menu items allow you to configure options for special functions. Select an item then
press <Enter> to display the submenu.
2.9.1

ASUS EZ Flash 2 Utility

Allows you to run ASUS EZ Flash 2. Press <Enter> to launch the ASUS EZ Flash 2 screen.
For more details, see section ASUS EZ Flash 2.
Setup Animator [Enabled]
This item allows you to enable or disable the Setup animator. Configuration options:
[Disabled] [Enabled]
2.9.2

ASUS Overclocking Profile

This item allows you to store or load multiple BIOS settings.
The Setup Profile Status items show Not Installed if no profile is created.
Profile Name
Allows you to key in a profile name.
Save to Profile
Allows you to save the current BIOS settings to the BIOS Flash, and create a profile. Key in a
profile number from one to eight, press <Enter>, and then select Yes.

Load Profile

Allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the profile
number that saved your CMOS settings, press <Enter>, and then select Yes.
• DO NOT shut down or reset the system while updating the BIOS to prevent the
system boot failure!
• We recommend that you update the BIOS file only coming from the same memory/
CPU configuration and BIOS version.
Load/Save CMOS Profile from/to USB Drive
Allows you to load/save CMOS profile from/to USB drive.
ASUS Z97-PRO GAMER
2-51