Table of Contents
Advertisement
Temperature & Process Measurement Indicators Setup Guide
Messages
The input circuit, when measuring mV, thermocouple or RTD, has
brk
detected an open circuit sensor connection. When a sensor break is
detected by the instrument, the measured value will be forced upscale
causing any high alarms to be activated.
undr oVEr
allowed range, either outside the normal range of the connected
thermosensor or the maximum/minimum display range for the decimal
places set.
Alarm Messages
Alarm messages are 3 letters followed by the alarm number. The codes
are:
HiA1 HiA2
has been activated.
LoA1 LoA2 LoA3
NOTE: Alarm 3 has the highest priority for messages and Alarm 1 has the
lowest.
18
Displayed when the measured value goes out of its
HiA3
High alarm. Eg. HiA3 indicates high Alarm 3
Low alarm.
20-5110 Issue G
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the tracker 211 and is the answer not in the manual?
Questions and answers