The Setup Menus - Data Track tracker 211 User Manual

Temperature & Process Measurement Indicators Setup Guide

The Setup Menus

The instrument uses a single level menu structure. The menu system lists
parameters (eg. inPt, unit, dP, etc.), each of which leads to a list of
configurable instrument options (eg. the parameter inPt leads to the
options mV, mA, VoLt etc.).
To enter the setup menus:
1. Remove the front cover by pushing the extraction tool into the gap
below the bezel and then pulling the tool forward to unclip the bezel
as shown in the diagram below.
20-5110 Issue G
Behind the Front Panel
9