Edit Mode; Copying Onto A Dvd Recorder Or A Vcr (Dubbing); Using The Dv Cable For Recording (Digital Dubbing) - Panasonic NV-GS27GN Operating Instructions Manual

LSQT1008ENG.book 30 ページ ２００６年１月１８日 水曜日 午前１０時４分

Edit mode

Copying onto a DVD recorder or a
VCR (Dubbing)
Pictures recorded by the movie camera can be
stored on a DVD-RAM or other such media. Refer
to the instructions for the recorder.
≥Place a recorded cassette in the movie
camera, and an unrecorded DVD-RAM or
cassette in the DVD recorder or VCR.
1
Connect the movie camera and the
recorder.
Connecting with the AV cable
[VIDEO IN]
[AUDIO IN]
A/V
≥Connect the movie camera and the recorder
by using the AV cable 1.
Connecting with the optional DV cable
(Only for equipment with a DV terminal)
DV
2
Turn on the movie camera and set to Tape
Playback Mode.
3
Select the input channel on the TV set and
recorder.
4
Move the joystick up to select the [1/;]
icon to start playback. (Player)
≥The image and sound are reproduced.
5
Start recording. (Recorder)
6
Stop recording. (Recorder)
7
Move the joystick down to select the [∫]
icon to stop playback. (Player)
≥For more information, refer to the operating
instructions for your TV set and recorder.
30
LSQT1008
Edit mode
≥When you do not need functional indications or
date and time indication, set [BASIC] >>
[DATE/TIME] >> [OFF] in the Tape Playback
Mode. (When you connect the movie camera
and a recorder with the DV cable, these
indications may not appear.)
ª
≥Check that the plugs are inserted as far as they
go.
≥Check the [12bit AUDIO] settings. (
≥Check the connected terminal.
Using the DV Cable for Recording
(Digital Dubbing)
By connecting other digital video equipment with
DV terminal and the movie camera by using the
DV cable VW-CD1E (optional) 1, high-image-
quality dubbing can be done in digital format.
This model cannot be used as a Recorder.
≥Set to Tape Playback Mode.
(Player/recorder)
1
1
S /
2
(L2) (L2)
2
3
4
≥Do not plug or unplug the DV cable during
dubbing, or the dubbing may not be completed
properly.
≥Even if you use a device equipped with DV
terminals such as IEEE1394, you may not be
able to perform digital dubbing in some cases.
For more information, see the instructions for
equipment connected.
≥Regardless of the menu settings on the
recorder, digital dubbing is carried out in the
same mode as the [AUDIO REC] mode of the
playback tape.
≥The images on the recorder monitor may be
disturbed, but it does not affect the recorded
images.
When neither image nor sound from
the movie camera is output to the TV
set
Connect the movie camera and digital video
equipment with the DV cable.
DV
DV
Start playback. (Player)
Start recording. (Recorder)
Stop playback. (Player)
)
-33-
1