BMW K1600GTL Rider's Manual page 145

Insert the ABS sensor into its
bore and install screw 1.
Ease the brake calipers on to
the brake discs.
Install securing screws 3 on
left and right and tighten to
specified tightening torque.
Front brake caliper to
wheel carrier
30 Nm
Clip on retaining clip 1 holding
the sensor cable to the brake
line.
Secure new cable tie 2.
Remove the adhesive tape
from the wheel rim.
Firmly pull the handbrake lever
several times until a pressure
point is perceptible.
8
143
z