BMW K1600GTL Rider's Manual page 143

Force the brake pads 4 slightly
apart by rocking brake caliper 5
back and forth against brake
disc 6.
Carefully pull the brake calipers
back and out until clear of the
brake discs.
Remove screw 1 and remove
the wheel-speed sensor from
its bore.
Lift the front of the motorcycle
until the front wheel is clear of
the ground, preferably using
a BMW Motorrad front-wheel
stand.
Installing front-wheel stand
( 145).
ATTENTION
Incorrect gap between
sensor ring and wheel speed
sensor due to misaligned
threaded bush in front
suspension.
Damage to wheel speed sensor.
ABS malfunction.
Left clamp locates the
threaded bush; do not loosen
or remove this clamp.
Remove right-hand axle clamp-
ing screw 2.
Remove quick-release axle 3,
while supporting the wheel.
8
141
z