DeWalt DWM120 Original Instructions Manual

Hide thumbs Also See for DWM120:

Advertisement

DWM120
www.
.com

Advertisement

Table of Contents
loading

Summary of Contents for DeWalt DWM120

  • Page 1 DWM120 www. .com...
  • Page 2 English (original instructions) Copyright D WALT...
  • Page 3 FIG. 1 45º STRAIGHT UP LOOSEN BLADE DIRECTION FIG. 2...
  • Page 4 FIG. 3 FIG 4 BLADE DIRECTION POSITION OF TEETH ON LEFT SIDE OF MACHINE FIG. 5 FIG. 6 FIG. 7 RECOMMENDED CUTTING POSITIONS...
  • Page 5: General Power Tool Safety Warnings

    When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use DWM120 reduces the risk of electric shock. If operating a power tool in a damp location is unavoidable, Congratulations! use a ground fault circuit interrupter (RCD) protected supply.
  • Page 6: Using An Extension Cable

    Blade Speed ....no load speed ....earthing terminal Your DWM120 portable band saw is equipped with variable speed for greater versatility. Turn the speed wheel (I) to select the desired ....Class I Construction (grounded) speed (Fig. 1). Speed 1 is the slowest speed; Speed 5 is the ....Class II Construction (double insulated)
  • Page 7: Operation

    An accidental start-up can cause injury. @ CAUTION: Cut Hazard. Blade tension lever is under spring and over heating. All DEWALT tools are factory-tested. If this tool does not operate, check the power supply line for blown fuses pressure. Maintain control of lever when releasing blade tension.
  • Page 8 This will cause serious damage to the band saw blade. To obtain maximum service life of the band saw DEWALT, have not been tested with this product, use of such blade, ensure there is no sudden impact at the beginning of the accessories with this tool could be hazardous.
  • Page 9 EN G LI S H...

Table of Contents