BMW C650GT Rider's Manual page 99

Install front wheel
WARNING
Use of a wheel which does
not comply with series speci-
fications.
Malfunctions during control inter-
ventions by ABS and ASC.
Please see the information on
the effect of wheel sizes on the
ABS and ASC chassis control
systems at the beginning of
this chapter.
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque.
Damage or loosening of screwed
connections.
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
ATTENTION
Front wheel installation op-
posite the running direction.
Accident hazard
Observe running direction ar-
rows on tire or rim.
Roll front wheel into front
suspension.
Lift front wheel and install
quick-release axle 2 with
torque.
Quick-release axle in axle
mount
22 lb/ft (30 Nm)
Tighten clamping screws 1 to
specified torque.
Clamping screws (quick-
release axle) in tele-
scopic forks
Tightening sequence: Tighten
the screws 6 times, alternating
between one and the other
each time
6 lb/ft (8 Nm)
8
97
z