Panasonic NV RZ 15 B Operating Instructions Manual page 45

3
Keep the [W.B] Button
pressed until the [1]
1
Indication stops
flashing and remains
lit.
;W.B
Returning to the Auto
White Balance
Adjustment Mode
Press the [W.B] Button
once. Or, press the
[PROG. AE] Button
repeatedly until the
[AUTO] Indication
appears.
;W.B
PROG. AE
Remarks, etc.
In the following cases, you cannot change
White Balance:
≥When you set [DIGITAL EFFECT] on the
[DIGITAL EFFECT] Sub-Menu to [B/W], [SEPIA],
[RED FILTER] or [BLUE FILTER]
≥During 0 Lux Night View Mode
In the Following Cases, the [1] Indication
Flashes:
≥During manual adjustment of the white balance.
(If the surroundings are dark and the white
balance cannot be adjusted, the [1] Indication
keeps flashing.)
≥When the previously Manual White Balance
Adjustment is maintained.
≥We recommend that you adjust the white balance
anew whenever there is a change in the recording
situation.
Subjects and Recording Conditions Not
Suitable for Recording in the Full Auto
Mode
≥Subjects with dark surfaces
≥Subjects lit by natrium lamps
45