Panasonic NV RZ 15 B Operating Instructions Manual page 43

Cancelling the 0 Lux Night View Function
Set the [0 LUX OFF/ON] Switch to [OFF] to make
the [0LUX] Indication disappear.
O LUX
Cancelling the Super Image Stabilizer
Function
Press the [SIS] Button again.
In the Following Recording Conditions, the
∫
Picture Stabilizing Effect May Not Be
Sufficient:
≥Subjects with horizontal or vertical stripes
≥Flat subjects
≥Dark subjects (In this case, the [[] Indication
flashes. Increase the amount of light.)
≥Subject under many fluorescent lamps.
OFF
ON
SIS
Remarks, etc.
Notes for Recording in Dark Places without
Any Illumination
≥Do not use the 0 Lux Night View Function in brightly
lit places and never aim the Movie Camera against
the sun, as this could cause irreparable damage.
≥The playback picture of scenes recorded with the 0
Lux Night View Function will be in black and white.
≥If you change the setting of the [0 LUX OFF/ON]
Switch during recording, a switching noise is also
recorded.
≥When recording in the 0 Lux Night View Function, it is
not possible to adjust the white balance manually or
to cancel the manually adjusted white balance setting.
≥It is not possible to use any of the Programme AE
Modes when the 0 Lux Night View Mode is activated.
≥When using the 0 Lux Night View Function, the
subject should be within 3 metres from the Movie
Camera.
≥When the automatic focusing is not precise, adjust
the focus manually.
≥As the iris is fully opened in the 0 Lux Night View
Mode, subjects in white or other light colours may be
recorded whitish, blurred and with weak contrast.
≥If you use the 0 Lux Night View Function together
with the Motion-Sensor-Controlled Recording
Function, recording starts automatically when the
Movie Camera's built-in Motion Sensor detects some
movement in the picture. This combined function is
convenient for easy, unattended animal observation
recordings at night.
43