Advertisement
INSTALLATION GUIDANCE
Connecting the car adapter and installing the unit
Insert the car adapter into the accessory socket and connect the USB
plug to the car adapter.
Note
• Be sure to remove any dirt from the
accessory socket. Failure to do so
could cause faulty contact or fi re.
1
• The car adapter has 2 USB ports, one of which for the Plasmacluster
Ion Generator (IG-GC2A) uses and another one for connecting equipment
of 1.5A or lower.
• The car adapter (accessory) is for the Plasmacluster Ion Generator
"IG-GC2A".
It is possible to connect another equipment of 1.5A or lower while the
Plasmacluster Ion Generator is connected. However, in this case, the
normal operation of the additional equipment is not guaranteed.
• The car adapter and/or connecting section could be hot while in use
and/or right after use.
Adjust the angle of louver
and put the unit in the cup
holder.
2
IG-GC2_EN.indd 5
IG-GC2_EN.indd 5
Approx. 55°
Approx. 20°
E-5
Car Adapter
Accessory
Socket
USB Plug
6/30/2559 BE 10:42 AM
6/30/2559 BE 10:42 AM
Advertisement
