Table Of Contents - Sharp Plasmacluster IG-GC2A Operation Manual

ENGLISH
CONTENTS
• IMPORTANT SAFETY INSTRUCTIONS .................................................E-2
• PARTS NAME ..........................................................................................E-4
• INSTALLATION GUIDANCE ....................................................................E-5
• OPERATION ............................................................................................E-7
• CLEANING AND MAINTENANCE ...........................................................E-8
• PLASMACLUSTER ION GENERATING UNIT REPLACEMENT.............E-10
• SPECIFICATIONS ...................................................................................E-11
• TROUBLESHOOTING .............................................................................E-12
• While IG-GC2A can remove suspended viruses and other contaminants, it
cannot create a completely sterile environment. SHARP does not guarantee
its ability to prevent microbial infection.
• To enable stable emission of high-density Plasmacluster ions, the
Plasmacluster Ion Generating Unit mounted in IG-GC2A will need to be
replaced periodically*.
• The unit is designed for ordinary passenger cars with DC 12V batteries.
It cannot be used in vehicles with DC 24V batteries (buses, trucks, etc.).
* Replacement is required approximately every 6 years (17,500 hours) when operated 8 hours a day.
IG-GC2A will stop operating after about 6 years and 6 months (19,000 hours) if the Plasmacluster Ion
Generating Unit is not replaced.
Thank you for purchasing this SHARP Plasmacluster Ion Generator. Please read
this manual carefully before using Plasmacluster Ion Generator. After reading,
keep the manual in a convenient location for future reference.
IG-GC2_EN.indd 1 IG-GC2_EN.indd 1
E-1
6/30/2559 BE 10:42 AM 6/30/2559 BE 10:42 AM