TH-37PH9UK / TH-42PH9UK
7 Disassembly (42 inch)
· To disassemble P.C.B., wait for 1 minute after power was
off for discharge from electrolysis capacitors.
·
and
marks indicate screw positions.
7.1.
Removal of the Back Cover
1. Remove the screws (×18
the Back Cover.
7.2.
Removal of the HU-Board
1. Remove the 4 screws(A) and then remove the HU Terminal
Block.
2. Remove the 4 screws(B).
3. Remove the 3 screws(C) and then remove the HU-Board.
, ×6
, ×4
) and then remove
7.3.
Removal of the HA-Board
1. Remove the 4 screws(D) and then remove the HA Terminal
Block.
2. Remove the 4 screws(E).
3. Remove the 3 screws(F) and then remove the HA-Board.
7.4.
Removal of the Slot Block
1. Disconnect the couplers (J1, J2, J3, J4, J5, J6, J7, J8, J10,
J15,J30).
2. Remove the 4 screws and then remove the Slot Block.
20