Product Overview; Operation; Checking The Engine-Oil Level - Toro 22295 Operator's Manual

Product Overview

1. Handle
2. Blade-control bar
3. Throttle
4. Rear door
5. Fuel-tank cap
6. Air cleaner
Figure 11
7. Spark plug
8. Cutting-height lever (4)
9. Oil fill/dipstick
10. Grass bag
11. Recoil-start handle

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.
Each time before you mow, ensure that the self-propel drive
and the blade-control bar operate properly. When you release
the blade-control bar, the blade and the self-propel drive
should stop. If they do not, contact an Authorized Service
Dealer.
CAUTION
This machine produces sound levels in excess of
85dBA at the operator's ear and can cause hearing
loss through extended periods of exposure.
Wear hearing protection when operating this
machine.
1. Warning—wear hearing protection.

Checking the Engine-Oil Level

Service Interval: Before each use or daily—Check the
engine-oil level.
Before you use the machine, ensure that the oil level is
between the lower-limit and the upper-limit marks as shown
on the dipstick (Figure
1. Dipstick
2. Upper-limit mark
11
Figure 12
13).
Figure 13
3. Lower-limit mark