Subscribe to Our Youtube Channel
Related Manuals for Maximum 054-3245-2
Summary of Contents for Maximum 054-3245-2
- Page 2 TABLE OF CONTENTS TECHNICAL SPECIFICATIONS SAFETY INSTRUCTIONS IMPORTANT INFORMATION PARTS LIST KNOW YOUR TOOL OPERATING INSTRUCTIONS MAINTENANCE WARRANTY NOTE: If any parts are missing or damaged, or if you have any questions, please call our toll-free helpline at 1-888-670-6682. SAVE THESE INSTRUCTIONS This manual contains important safety and oper- ating instructions.
- Page 3 • Do not expose power tools to rain or wet conditions. Water entering a power *Maximum battery voltage without workload; with workload nominal voltage is 18V. tool will increase the risk of electric shock. • Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
- Page 4 054-3245-2 | contact us 1-888-670-6682 • Use personal protective equipment. Always wear eye protection. performed. Protective Use of the power tool for operations different from those intended equipment such as a dust mask, non-skid safety shoes, a hard hat, or hearing could result in a hazardous situation.
- Page 5 To reduce the potential risk of damage to the electric plug and cord, pull by the are doing. The battery has been designed to provide maximum trouble-free life. plug rather than the cord when disconnecting the charger from the power supply.
- Page 6 054-3245-2 | contact us 1-888-670-6682 No. Description No. Description 1/2” square anvil Battery release button LED worklight Rechargeable battery pack Forward & reverse lever Charger Trigger switch Charging indicator Remaining power indicator Detachable cable & plug NO. DESCRIPTION NO.
- Page 7 054-3245-2 | contact us 1-888-670-6682 FITTING AND REMOVING THE BATTERY PACK TO THE other two lights will blink in sequence. IMPACT WRENCH - Over 60% charged: two lights will stay on, while the remaining light will blink continuously. • To install the battery pack to the tool, align the raised portion of the battery pack with the grooves on the...
- Page 8 054-3245-2 | contact us 1-888-670-6682 VARIABLE SPEED LED WORKLIGHT The variable speed trigger switch delivers higher speed with When the unit is switched on, the LED worklight also comes on to increased trigger pressure and lower speed with decreased ensure better vision and to make working in dark areas safer.
- Page 9 054-3245-2 | contact us 1-888-670-6682 LOW-VOLTAGE CUT-OUT • Bolt. The proper fastening torque will differ according to the diameter of the bolt, the torque coefficient, the bolt length, and the class of bolt. The battery pack used on this tool is fitted with a low-voltage cut-out feature within • The use of a universal joint or an extension bar (both available separately) will the circuitry. The low-voltage cut-out feature operates when the voltage drops below reduce the fastening force of the impact wrench somewhat.
- Page 10 The product must not be discarded with normal household waste. It must be disposed of properly. The batteries in this tool have been designed to provide maximum trouble-free life. Like all batteries, they will eventually wear out. Do not disassemble the battery pack or attempt to replace the batteries.
- Page 11 (unless otherwise specified in writing); This MAXIMUM product is guaranteed for a period of 5 years from the date of original this warranty will not apply to any product or part thereof if any part from another...
- Page 12 If you are not completely satisfied with the performance of your MAXIMUM product for advised of the possibility thereof. Notwithstanding any provision herein or entitlement...
Need help?
Do you have a question about the 054-3245-2 and is the answer not in the manual?
Questions and answers